Installation & First Model
This page does exactly one thing: get you to see a result computed from a model you built yourself within 15 minutes. No feature tour, no theory.
1. Install
Section titled “1. Install”Download the Windows installer and double-click to run. Installation requires no administrator privileges and installs into the user directory.
On first launch you’ll be asked to choose the unit system and the default code package:
- Unit system: default
mm-kN-s—don’t change it for steel structures - Code package: choose GB for Chinese projects, AISC for US-standard projects
Both can be changed later under Edit → Preferences, but changing the unit system will ask you to confirm how existing data should be converted, so picking right the first time saves trouble.
2. Build a Simply Supported Beam
Section titled “2. Build a Simply Supported Beam”After creating a new project, the viewport is empty. The model tree is on the left, the properties panel on the right.
Step 1: Add a material
Right-click in the model tree → New Material → choose type “Isotropic Elastic”. Fill in:
| Field | Value | Unit |
|---|---|---|
| Elastic modulus E | 200 | kN/mm² |
| Poisson’s ratio ν | 0.3 | — |
| Density ρ | 7.85e-12 | kN·s²/mm⁴ |
Step 2: Add a section
Right-click → New Section → choose “I-section”, then pick HN400×200×8×13 from the section library. The library is filtered by the active code package: US-standard sections won’t appear when the GB package is active.
Step 3: Draw the geometry
Select “Line” in the top toolbar, click two points in the viewport, and stretch out a 6000 mm beam.
Step 4: Mesh elements
Select the line → right-click → Mesh Elements → set the number of segments to 10. The status bar will show “Elements 10 / Nodes 11 / DOFs 66”.
Step 5: Add supports
Select the left-end node → right-click → Add Support → check UX UY UZ RX RY RZ (fixed).
Select the right-end node → Add Support → check only UY UZ (simply supported).
With the supports set correctly, the model-check indicator in the status bar is green. Solving is not allowed while the light is red—this is a hard rule, not a suggestion.
Step 6: Add load
Select the mid-span node → right-click → Add Nodal Load → FY = -100 kN (downward).
3. Solve
Section titled “3. Solve”Toolbar “Analysis” → New Analysis Step → choose type “Static” → Solve.
A 6000 mm beam, 10 elements, 66 DOFs—the solve should finish within 1 second.
4. View Results
Section titled “4. View Results”After solving, the viewport switches to results view automatically. Use the top-left control to switch result type:
- Deformation: check the shape; default magnification is 100× (adjustable in the status bar)
- Bending moment Mz: concentrated load at mid-span of a simply supported beam—the mid-span moment should be
PL/4 = 100 × 6000 / 4 = 150 kN·m - Shear force Fy: 50 kN on each side of the supports
5. Export the Calculation Report
Section titled “5. Export the Calculation Report”File → Export Calculation Report, pick a template, export as docx.
Every number in the report carries a code-clause citation (when a code package is used) and a model snapshot. This step is never restricted—the free version exports full calculation reports too, with no watermark.
Next Steps
Section titled “Next Steps”- To understand why modeling follows this order: Build Order & Dependencies
- To bring in AI to help you model:
Edit → Preferences → AI, configure a local model or your own API key